Labconco Precise Atmosphere GloveBox w/Transfer Chamber

SOLD

Lightly used Labconco Glove Box Precise Controlled Atmosphere and Transfer Chamber.

 Specifications: 

• Weight: 260.0 lbs
• Weight metric: 118.0 kg
• Dimensions: 52.7" w x 31.6" d x 40.0" h
• Dimensions metric: 140 x 80 x 102 cm
• Electrical: 115 volts, 60 Hz, 8 amps
• Built-In Options: None
• Conformance: CAN/CSA C22.2 No. 1010.1, ETL, UL 3101-1/61010-1
• Electrical Standard: Domestic
• Filter Type: None
• Interior Working Width: 33.5"
• Liner Material: Polyethylene
• Number of Glove Ports: Two
• Power Cord & Plug: 115 volts, 8 amps
• Primary Application: Atmosphere-sensitive materials
• Product Subcategory: Controlled Atmosphere Glove Box
  
  Features:
• One-piece molded, medium-density polyethylene shell.
• Dry powder epoxy-coated steel superstructure
• 1/4" thick laminated safety glass viewing window, 26.4" wide x 12.5" high, removable for loading equipment, with powder-coated steel frame and neoprene gasket
• Space-saving inner and outer transfer chamber doors that pivot upward, are counterbalanced and equipped with quick-latches
• Black, chemical-resistant work surface sealed to the glove box floor
• Pressure relief valve that activates at pressure/vacuum above 6 inches or below -6 inches of water gauge.
• Pressure relief valve vent, 4" nominal diameter
• Interior ceiling-mounted electrical duplex receptacle with 5 amp maximum circuit load
• Neoprene gloves, size 9 3/4, are included.
• Fluorescent lamp, 22 watts, with easy replacement from the top
• Switches for light and innermost interior electrical receptacle
• Approximately 13 cubic feet of interior space in main chamber
• 11.0" nominal ID x 12.0" long transfer chamber
• Factory leak tested with a mass spectrometer while glove box is pressurized with helium at 5 inches of water gauge.
• No detectable leaks greater than 1 x 10(-4) ml/sec
• Meet Class 1 atmosphere containment conditions for oxygen leak rates per ISO 10648-2 test method
• Six manual valves for purging and filling of both main chamber and transfer chamber and for drying train connections
• Main chamber pressure gauge with readings from -5 to +5 inches of water gauge
• Transfer chamber pressure gauge with readings from 0 to -29 inches of mercury
• Transfer chamber high vacuum sleeve and interior interlocking shelf of dry powder epoxy-coated steel
• ETL listed (115 volt models)
• CE Conformity (230 volt models)

Need an ultrapure inert atmosphere? All Precise Controlled Atmosphere Glove Boxes are compatible with the new AtmosPure Re-Gen Gas Purifier accessory, which has the capacity to remove up to five liters of oxygen (13.500 ppm) and 660 grams of moisture (18 million ppm) at standard temperature and pressure (STP).

Required Accessories: Inert Gas, Supporting Base, Vacuum Sourcesphere Glove Boxes provide a leak-tight environment for work with contamination-sensitive materials. Procedures where low levels of oxygen or moisture are important, such as work with organometallics, alternative energy cells or hydrophilic chemicals, are typical applications for these economical glove boxes.